Benfer Rapido White Adhesive 20Kg

Rapid hardening and fast setting flexible adhesive

• Suitable for use on plywood overlay
• Ideal for porcelain ceramic and natural stone
• Ideal for large format tiles
• For internal and external use
• Extra white and grey
• Increased flexibility
• Quick setting
• Application thickness up to 15 mm
• Tested in accordance with EN 12004 CLASS C2F TE S1

APPLICATION:

INTERIOR: Lay the tiles by applying sufficient pressure that there is at least 95-100% contact between tile and adhesive.

EXTERIORS: contact must be 100% so as to prevent the infiltration of rainwater, which in the event of frost, could cause the tiles to detach. You are therefore advised to spread a layer of BENFERFLEX RAPIDO on the back of the tiles too.

We recommend this method for interior tiling, in the following cases:
• Floor tile sizes exceeding 500 cm2 with tiles with absorption of less than or equal to 0.5%
(e.g. porcelain tile)
• Floor tile sizes exceeding 1100 cm2 with other types of tile
• Wall tile sizes exceeding 120 cm2 with tiles with absorption of less than or equal to 0.5%
(e.g. porcelain tile)
• Wall tile sizes exceeding 500 cm2 with other types of tile
• Special applications such as industrial cold rooms, baths, swimming pools etc.
It is essential to leave a joint of at least 3 mm between each tile, and to ensure that the tiling
conforms with the expansion joints of the structure to be elastically sealed, the joints between walls,
and the joints between wall and floor. In any event, expansion joints or perimeter joints must be
left about every 20 m2.

CLEANING: Tiling should be cleaned with a damp cloth or sponge when the adhesive has already started to set. Allow 24 hours after completion of tiling before cleaning with larger quantities of water.

PACKAGING: BENFERFLEX RAPIDO is packed in5 kg and 20 kg poly-lined bags, is supplied on pallets of 600 kg and 1,120 kg.

STORAGE: In the original unopened packaging in a dry and cool place.

SHELF LIFE: 12 months from the date printed on the packaging.

CONSUMPTION: The consumption changes according to planarity of the support, to the used trowel and to the laying system (simple or double gluing).